Pittsburgh Commercial Shower Leak Basics
The Signs of a Commercial Shower Leak
The signs of a Pittsburgh commercial shower leak are the same as those that are to be found in any other city, with one exception. That exception is that Pittsburgh is known for its hard water, and exceptionally hard water over time will lead to problems. Shower problems like leaky faucets that aren’t closing entirely due to calcium buildup.
So when folks in the Greater Pittsburgh area ask if this type of commercial shower leak is common? The answer to that question is yes if they don’t have a water softener to remove dissolved minerals in the water.
So one of the first signs of a commercial shower leak caused by hard water is a persistently dripping faucet or showerhead. Calcium buildup is preventing a once-tight seal to function properly when it’s closed.
But there are still more answers when business owners ask what are the causes of a commercial shower leak?
One common source of problems is brought on by hanging wet clothes or towels on the showerhead. People fail to understand that over time the force of the heavy wet clothes will often cause a leak at the plumbing connection point.
This type of commercial shower leak can be challenging to detect until it’s too late because it only occurs when the shower is on, so the spray conceals it. Then this type of leak tends to drip behind the shower wall.
But this is just one type of shower leak because there are other answers when people ask what are the causes of a commercial shower leak? For example, another one is neglecting to use grout sealer on tile work.
It’s not just in a commercial shower either because there are other areas in homes in business that could use a periodic treatment with a good quality tile grout sealer. Many people assume that once tile work is done and the grout has appropriately cured, it’s ready to go.
However, there’s still just one more step to take before the shower faucet can be turned on. That step is to seal it with a good quality grout sealer, and the irony is they’re readily available and easy to use. It’s even available now in an aerosol spray canister.
Then once is not enough because commercial showers do get a lot of use, so they should be treated at least once a year. Clean the tile first to remove any built-up soap residue, then allow it to dry. Then apply the grout sealer. Granite countertops should also be treated with a sealer every year or so.
Then another question that’s frequently asked is what are common signs of a commercial shower leak? The first answer here really needs no explaining because the most common source of commercial shower leaks is the faucet.
A seal begins to fail, resulting in a steady drip that for sure isn’t hard to miss. But other leaks are more difficult to detect that have people searching for answers to the question of what are the common signs of a commercial shower leak.
So one surefire common indicator is mold on a wall in a room or closet adjacent to the shower. You won’t find mold on a tile or fiberglass shower if there’s a leak inside the wall; instead, you’ll have to look on the sheetrock wall behind it.
After all preventive measures have failed or the time has taken its toll still, another question commonly asked for residents of the Greater Pittsburgh area is how to stop commercial shower leaks in Pittsburgh. The blanket answer here is that shower leaks come in several forms, so there would, of course, be several solutions to them.
Some are the result of problems with tile adhesion that have developed or perhaps a crack in a fiberglass base. Then some are the result of a leak in the plumbing behind the wall or the shower drain, so it’s only natural that a person would ask, does a plumber repair showers?
The answer here is yes, they do. Not in the tile or fiberglass lining but for sure, plumbers do repair work on the water lines, faucets, and drain.
So then you may be asking what are standard plumbing repair services for showers? It turns out that they offer several types of services and the first and possibly among the most important is a plumber can help you determine the cause of the leak.
It’s water coming through cracks in the wall or the tile floor? Or is the source linked to a plumbing issue? It can be difficult to tell, but a plumber is familiar with shower repair diagnosis.
Then if it does turn out to be a plumbing issue, here again, it’s the experience that comes with time in the business that enables a plumber to open the wall and do the repair with the minimal amount of repair work left behind after the job is done.
Then finally, when it comes to commercial shower damage repair in Pittsburgh, Pennsylvania, an ounce of prevention really is worth a pound of cure. Most people don’t give it much thought, so they keep the shower clean and feel that’s all that needs to be done.
Then when their shower does develop a leak, they’re left wondering what the cause was and what they could have done to prevent it. So the question here is, what should you do to prevent shower leaks?
It turns out that there are a few plausible answers to the question, and some of them have been previously listed in this article. But the one preventive measure that you can take that will have the most significant impact is to use quality products and reputable craftsmen when a shower is built or installed.
If you’ve found yourself shopping around for the best rock bottom deal on materials and labor for an upcoming shower project, there is something that you should be aware of. That is something that the absolute cheapest labor and materials bring with it their own risks in terms of longevity of the finished results.
If you pay peanuts, you’ll end up with monkeys is a famous saying among Pittsburgh plumbers, and it also applies to hardware and materials purchase at the lowest rock bottom prices.
So make sure to always go with a licensed and insured Pittsburgh plumber and never use dirt cheap or, worse yet, used hardware like faucets and shower doors on your project.